Toshiba m700-m710 Manual De Usuario

User’s Manual

7-8

HW Setup & BIOS Setup

Settings for some features are carried out in the BIOS setup program.

1. Turn on the computer while pressing the ESC key - if the Password = 

prompt is displayed, enter either the Supervisor Password, if one is set, 
or the User Password and press the ENTER key. Please refer to 
Chapter 6, the 

 for further details about the 

User Password.

2. At the Check system. Then press [F1] key. prompt, press the 

F1 key - the BIOS setup application will start up.

In order to save the changes you have made and end the BIOS setup 
application, follow the steps as detailed below:

1. Press the END key - this will cause the Are you sure? (Y/N). The 

 

prompt to be displayed at the bottom of the screen.

2. Press the Y key - this will save the configuration changes and end the 

BIOS setup application, automatically restarting the computer.

■

In most cases, changes to the system's configuration should be made 
within Windows by using applications such as TOSHIBA HW Setup, 
TOSHIBA Password Utility, Windows Device Manager and so forth. 
If you make changes to the configuration through the BIOS setup 
program, please be aware that the configuration set through the 
Windows applications will take priority.

■