Toshiba protege pt530u Manual De Usuario

44

memory if you use complex software or process large amounts of 

data.

Memory modules can be installed in the memory module slots on 

the underside of the computer. You will need a small Phillips 

screwdriver for this procedure.

If the computer has been running recently, the memory module(s) 
may be hot. The surrounding area may also be hot. Allow the 
module(s) to cool to room temperature before replacing it. Avoid 
touching the cover, the module(s), and the surrounding area before 
they have cooled. Failure to follow these directions could result in 
minor bodily injury.

To avoid damaging the computer’s screws, use a small Phillips 
screwdriver of the correct size that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You can 

install one or two memory modules.

Before you install or remove a memory module, turn off the 
computer, unplug the AC adaptor, and remove the battery. If you 
install or remove a memory module while the computer is in Sleep or 
Hibernation mode, data will be lost.

For this model, Slot A is the bottom slot. Slot B is the top slot. If only 
one memory module is to be installed, it must be installed in Slot A. 

If the computer is on, begin at step 

; otherwise, skip to step 

From the Start or Desktop screen, move your pointer over the 

upper or lower right corner of the screen.

When the Windows

®

 Charms appear, click the Settings  ( ) 

Charm.