Toshiba satellite pro 6000 Manuales De Servicio

1. 

Remove two mask seals at the bottom corners of the

    display assembly using a pair of fine-tipped tweezers.
2. Remove two M2.5x6 black flat head screws securing 
    the display mask.
3. 

There are 23 latches securing the display mask.

    Carefully insert your fingers between the mask and the
    LCD panel and pry open the latches starting from the
    six top latches, to the five latches on each right  
    and left sides, ending with the bottom seven latches.

1. Remove one M2x4 silver screw securing the 
    FL inverter board.
2. Carefully lift up the FL inverter board and 
    disconnect the LCD/FL cable from CN1 and the
    FL cable from CN2.
3. Remove four mask seals to expose four screws 
    securing the LCD module assembly.
4. Remove four M2X5 silver screws securing the 
    LCD module assembly.
5. Carefully rotate out the top of the LCD module
    enough to access the display cable
6. Peel off the tape securing the LCD/FL cable and
    disconnect the cable.
7. Remove four M2x3 silver screws securing the 
    right and left LCD brackets.

TM

Latch

Mask seals

Display
mask

LCD

LCD/
FL harness

FL inverter board

M2x5
silver
screws

M2x3
silver
screws

M2x3
silver
screws

M2x5 
silver
screws

FL cable

M2x4 silver screw

LCD module assy