Toshiba satellite pro 6000 Manuales De Servicio

1. Remove one M2.5x6 black flat head screw  securing the
    HDD guide assembly and lift out the HDD guide assembly.
2. Remove three M2.5x6 black flat head screws securing
    the select bay cover and lift out the select bay cover.

3. Disconnect following cables from the system board:
    -Sound interface cable from PJ103
    -SD interface cable from PJ150
    -DC-IN jack harness from PJ803
4. Remove four M2.5x4 black flat head screws
    securing the system board.
5. Lift out the system board.

1. Disconnect the sound interface cable from PJ103 
    and the SD interface cable from PJ150 on the 
    SD/Sound board.
2. Remove one M2.5x4 black flat head screw
    securing the SD/Sound board.
3. Remove the wireless LAN switch button.
4. Lift out the SD/Sound board.

TM

 
1. Disconnect the power supply harness from PJ850
    and PJ851 on the system board. 
2. Remove two M2.5x4 black flat head screws securing
    the power supply board.
3. Disconnect the power supply board from the system
    board.  

    

System 
board

Power supply board

M2.5x4 black flat head screws

SD
interface
cable

M2.5x4 black flat head screw

Sound
Interface
cable

SD/Sound board

PJ150

PJ103

HDD guide
assy

M2.5x6 flat
head black
screw

M2.5x6 black flat head screws

Select bay cover

M2.5x4 black flat head screws

SD
interface
cable

Sound
interface
cable

DC-IN jack harness

PJ803

Power supply
harness

Wireless
LAN switch
button