kymco mo kxr 50 Manuales De Servicio
14
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
14-4
Mongoose/KXR 90/50
BATTERY REMOVAL
Remove seat. (See page 2-3)
Remove the battery cover, by removing the
mount bolts. (Make sure the ignition switch
is OFF)
Remove the battery by removing the bolts.
Remove the battery by removing the bolts.
First disconnect the battery negative (-)
cable and then the positive (+) cable.
The installation sequence is the reverse of
removal.
BATTERY VOLTAGE (OPEN CIRCUIT
VOLTAGE) INSPECTION
Remove the seat. (See page 2-3)
Remove the seat. (See page 2-3)
Disconnect the battery cables.
Measure the voltage between the battery
terminals.
Fully charged : 13.1V
Fully charged : 13.1V
Undercharged : 12.3V max
Bolts
Negative (-) Cable
Positive (+) Cable
Battery charging inspection must be
performed with a voltmeter.
°Ø
Battery Cover
When disconnecting the battery positive
(+) cable, do not touch the frame with
tool; otherwise it will cause short circuit
and sparks to fire the fuel.
First connect the positive (+) cable and then
negative (-) cable to avoid short circuit.