kymco mo kxr 50 Instruction De Maintenance

Remove seat. (See page 2-3)

Remove the battery cover, by removing the

mount bolts. (Make sure the ignition switch

is OFF)
Remove the battery by removing the bolts.

First disconnect the battery negative (-)

cable and then the positive (+) cable.

The installation sequence is the reverse of

removal.

VOLTAGE) INSPECTION
Remove the seat. (See page 2-3)

Disconnect the battery cables.

Measure the voltage between the battery

terminals.
Fully charged : 13.1V

Undercharged : 12.3V max

Bolts

Negative (-) Cable

Positive (+) Cable

Battery charging inspection must be

performed with a voltmeter.

Battery  Cover

When disconnecting the battery positive

(+) cable, do not touch the frame with

tool; otherwise it will cause short circuit

and sparks to fire the fuel.

First connect the positive (+) cable and then

negative (-) cable to avoid short circuit.