kymco mo kxr 250 Manuales De Servicio

• Do not bend or twist control cables. Damaged control cables will not operate smoothly.

• When disassembling fuel system parts, note the locations of O-rings. Replace them with new

ones during reassembly.

• Before float chamber disassembly, loosen the drain screw to drain the residual gasoline into a

clean container.

• After the carburetor is removed, plug the intake manifold side with a clean shop towel to prevent

foreign matters from entering.

• When cleaning the carburetor air and fuel jets, the O-rings and diaphragm must be removed first to

avoid damage. Then, clean with compressed air.

• When the motorcycle is not used for over one month, drain the residual gasoline from the float

chamber to avoid erratic idling and clogged slow jet due to deteriorated fuel.

Item

Standard

Type

PD

Venturi dia.

f22

Float level

 14.8mm

Main jet No.

98

Adjust method

Piston

Idle speed

1500±100rpm

Throttle grip free play

1_ 4mm

Air screw opening

1

1/8

±1/2

Gasoline is very dangerous. When working with gasoline, keep sparks and flames away

from the working area.

Gasoline is extremely flammable and is explosive under certain conditions. Be sure to work

in a well-ventilated area.