kymco mo mxu250 Manuales De Servicio

Remove the front fender. (See page 2-8)

Remove the rubber boot from the headlight

case.
Disconnect the headlight wire connector.

Relax the lock clips to remove the bulb and

replace with a new one.

Install the bulb, aligning the bulb socket

groove with the bulb tab and set the lock

clips.
Connect headlight wire connector.
Install the rubber boot.
Install the front fender in the reverse order

of removal.

Remove the bulb socket by pulling it out.

Remove the bulb.
Install the bulb in the reverse order of

removal

Rubber Boot

Bulb Socket

Lock Clips

Lock Clip

Headlight Connector