Yamaha aw16g Manual De Usuario

Using the AW16G with external devices

168

● Signal flow when using an external effect processor

In the Selected Channel section, repeatedly
press the [PAN/BAL] knob to access the PAN
page of the PAN screen, and spread apart the
pan settings of input channels 3/4.

The effect sound will be heard in stereo. If desired,
you can specify input channels 3/4 as a pair.

Note

If you use these settings, leave the AUX 1 knob and AUX
2 knob of input channels 3/4 set all the way to the left
(–

∞

dB). If you raise these levels, the signal will loop, cre-

ating oscillation.

Raise the [STEREO] fader to the 0 dB position,
and while playing back the song, adjust the
input level of your external effect processor
and use the [GAIN] knobs to adjust the input
level of input channels 3/4.

If desired, return to step 5 and readjust the send
level to AUX bus 1 for each track channel. If you
want to adjust the AUX bus 1 master level, use the
BUS page of the VIEW screen (or the AUX OUT
page of the PAN screen).

In the MIXDOWN page of the RECORD
screen, switch the REC button on, and per-
form the mixdown.

Note

When you are finished with the mixdown, turn the PAN
screen AUX OUT page setting back to its original setting
of STEREO.

Mixer section

Stereo bus

Input

channels

Stereo

output

channel

Recorder section

AUX bus

Track

channels

AUX bus 1

master

Effect processor

Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8