Digidesign 2 Manual De Usuario

Pan/Send

The Pan/Send view allows you to view the pan 
position and the controls for all of the sends on 
a selected track across all the Channel Scribble 
Strips. 

To display the pan and send controls for a track:

1  

In Stand-alone Mode, press the Pan/Send 

switch in the Channel View area. 

2  

Select a channel whose Pan and Send controls 

you want to display by pressing its Channel Se-
lect switch. The Display Scribble Strips show 
“P/S” and the number of the selected channel. 

Channel Scribble Strip 1 and the first rotary en-
coder show track pan position for the selected 
channel. 

Channel Scribble Strips 3–6 show the names and 
their rotary encoders control the levels for all 
five sends on that track. (Channel Scribble Strips 
2, 7 and 8 are inactive.) 

When you are displaying sends in Pan/Send 
view, the Channel Select switches toggles the 
send between pre- and post-fader operation. 

Displaying Parameter Values

The default view for channels, inserts in sends 
shows the name of the control in the Channel 
Scribble Strips, and the control’s numerical 
value is shown only when the control is touched 
or moved. 

By pressing the Command switch and the Dis-
play Mode switch in tandem, you can change 
the default view to the numerical value of a con-
trol rather than its name. 

To revert to the default display, press the Com-
mand switch and the Display Mode switch a sec-
ond time. 

In addition, pressing the Command switch in 
tandem with the Display Mode switch allows 
you to set channels to display numerical param-
eter values by default, rather than control 
names. For example, in Pan view, when you 
press Command + Display, fader volume levels 
(in dB) are the default display.