Digidesign 2 Manual De Usuario
Getting Started with Digi 002
10
4
Do one of the following, depending on your
system configuration:
■
Plug the other end of the FireWire cable into
an available FireWire port on your computer.
■
Plug the other end of the FireWire cable into
an available FireWire port on a FireWire hard
drive connected to your computer. (See “Con-
necting Digi 002 and FireWire Hard Drives” on
page 10.)
drive connected to your computer. (See “Con-
necting Digi 002 and FireWire Hard Drives” on
page 10.)
Connecting Digi 002 and FireWire Hard
Drives
Drives
The FireWire ports on Digi 002 do not pass au-
dio data when it is powered off, so if you
daisy-chain FireWire devices from your com-
puter, it is best to connect FireWire hard drives
directly to your computer and not to Digi 002.
This will prevent hard drive errors in case the
Digi 002 unit is powered off.
dio data when it is powered off, so if you
daisy-chain FireWire devices from your com-
puter, it is best to connect FireWire hard drives
directly to your computer and not to Digi 002.
This will prevent hard drive errors in case the
Digi 002 unit is powered off.
To use a FireWire hard drive with your Digi 002, do
one of the following:
one of the following:
◆
If your computer has more than one FireWire
port, connect the FireWire hard drive to one
FireWire port on the computer, and connect
Digi 002 to another FireWire port on the com-
puter.
FireWire port on the computer, and connect
Digi 002 to another FireWire port on the com-
puter.
◆
If your computer has only one FireWire port,
connect the FireWire hard drive directly to your
computer and then connect Digi 002 to an
available FireWire port on the drive.
computer and then connect Digi 002 to an
available FireWire port on the drive.
Connecting other FireWire Devices to
Digi 002
Digi 002
The second FireWire port on the Digi 002 unit is
available for daisy-chaining FireWire devices
such as digital cameras or digital video record-
ers. Even when it is powered off, Digi 002 sup-
plies power from the computer through its
FireWire ports, allowing you to recharge batter-
ies in other FireWire devices.
available for daisy-chaining FireWire devices
such as digital cameras or digital video record-
ers. Even when it is powered off, Digi 002 sup-
plies power from the computer through its
FireWire ports, allowing you to recharge batter-
ies in other FireWire devices.
Launching Pro Tools LE the
First Time
First Time
Validating Pro Tools Software
When launching Pro Tools the first time, you
are prompted to enter an authorization code to
validate your software.
are prompted to enter an authorization code to
validate your software.
To validate Pro Tools software:
1
Double-click the Pro Tools application in the
Pro Tools folder inside the Digidesign folder.
2
If OMS was not previously configured, you
will be prompted to configure a New Studio
Setup. For specific steps, see “Installing and
Configuring OMS” on page 9.
Setup. For specific steps, see “Installing and
Configuring OMS” on page 9.
3
Enter the authorization code in the dialog
when prompted, making sure to observe any
spaces, then click Validate.
spaces, then click Validate.
The authorization code is located on the inside
cover of this guide. Be sure to include any spaces
as you enter the authorization code.
cover of this guide. Be sure to include any spaces
as you enter the authorization code.
While it is possible to connect a FireWire
hard drive to an available port on Digi 002,
if the Digi 002 unit is powered off, any
mounted FireWire drives will lose their data
connection with the computer, which may
result in hard drive errors or data loss.
hard drive to an available port on Digi 002,
if the Digi 002 unit is powered off, any
mounted FireWire drives will lose their data
connection with the computer, which may
result in hard drive errors or data loss.
Authorization code validation for Pro Tools