Digidesign 2 Manual De Usuario

To connect the Digi 002 to your computer: 

1  

Turn on the power to the Digi 002 unit. 

2  

Locate the FireWire cable that came with your 

Digi 002.

3  

Plug one end of the FireWire cable into one of 

the ports marked “1394” on the back panel of 
the Digi 002. It does not matter which of the 
two ports you use. 

4  

Do one of the following, depending on your 

system configuration:

■

Plug the other end of the FireWire cable into 

an available FireWire port on your computer. 

■

Plug the other end of the cable into an avail-

able FireWire port on a FireWire hard drive con-
nected to your computer. (See “Connecting 
Digi  002 and FireWire Hard Drives” on page  17.) 

Connecting Digi 002 and FireWire Hard 
Drives

The FireWire ports on Digi 002 do not pass au-
dio data when it is powered off, so if you daisy-
chain FireWire devices from your computer, it is 
best to connect FireWire hard drives directly to 
your computer and not to Digi 002. This will 
prevent hard drive errors in case the Digi 002 
unit is powered off. 

To use a FireWire hard drive with your Digi 002, do 
one of the following:

◆

If your computer has more than one FireWire 

port, connect the FireWire hard drive to one 
FireWire port on the computer, and connect 
Digi 002 to another FireWire port on the com-
puter. 

◆

If your computer has only one FireWire port, 

connect the FireWire hard drive directly to your 
computer and then connect Digi 002 to an 
available FireWire port on the drive.

Connecting other FireWire Devices to 
Digi 002

The second FireWire port on the Digi 002 unit is 
available for daisy-chaining FireWire devices 
such as digital cameras or digital video record-
ers. Even when it is powered off, Digi 002 sup-
plies power from the computer through its 
FireWire ports, allowing you to recharge batter-
ies in other FireWire devices.

Installing Pro Tools LE 
Software

FireWire ports