Autostart as-1484ihf Manual De Usuario

User Guide 

P. 5 

1.  Turn the key to the 

 position. 

2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will come 

. 

To take the system out of Valet Mode: 

1.  Turn the key to the 

 position. 

2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will go 

. 

The Valet button can only be used if the vehicle keys are in the 

 position. 

Note:   Panic mode can only be activated if the horn has been adequately configured 

by your installer. 

 

In an emergency situation, you can activate Panic Mode using the 

 or 

 button. 

This will: 

• shut down the engine, 

• unlock the doors (with the 

 button) 

• or lock the doors (with the 

 button), 

• disarm the Starter Kill and 

• activate the horn for 25 sec. 

 

Note: See the description of the Starter Kill option later in this Guide. 

•  Press and hold the 

 button for approximately 3 sec. until the sound signal starts 

and the parking lights flash: this will unlock the doors before the sound signal starts. 

•  Or press and hold the 

 button for approximately 3 seconds until the sound signal 

starts and the parking lights flash: this will lock the doors before the sound signal 
starts. 

Panic Mode will automatically shut down after 25 sec. 

Note: To stop Panic Mode before the end of its delay, press the 

 or 

 button 

until the sound signal stops. 

When Cold Weather Mode is active, the engine starts every 2 hours and runs for 3 minutes 

(or for 8 or 18 minutes with Diesel engines); the routine goes on for a period of 24 hours. 

To enter Cold Weather Mode: 

•  With the vehicle already in Ready Mode, press and hold the 

 button until 

the parking lights flash 3 times. 

To exit Cold Weather Mode, do any one of the following: 

•  Open the hood. 

•  Start the engine using the remote control. 

•  Turn the ignition key to the

position. 

•  Press and hold the 

 button for 3 seconds 

(until the parking Lights flash once) 

•  Set the vehicle to Valet Mode. 

Advanced Features: Installation-programmable Options 
The remote car starter was designed with flexibility and OEM integration in mind. With its 

programmable options, this unit can single-handedly control nearly any electrical system in 

your vehicle. 

Note: The programming of these features should be left to a professional. Changing any 

one of the settings may adversely affect the operation your Remote Car Starter.