Trimble Outdoors aggps 332 Manual De Usuario
AgGPS 332 GPS Receiver User Guide 49
Configuring the Receiver 5
To enable WAAS reception in the field:
1.
Take the receiver outside. Make sure that it has a clear southeast
and southwest view of the sky.
and southwest view of the sky.
2.
Turn on the receiver. WAAS activation can take two or more
minutes. Once activation succeeds, the Home screen displays
minutes. Once activation succeeds, the Home screen displays
D/3D
:
5.1
Configuring the AgGPS Receiver to Operate in
Beacon Mode
Beacon Mode
To configure the receiver in Beacon mode:
1.
From the Home screen, select Configuration / DGPS Config.
2.
Set the Source Select field to Beacon.
3.
Press
4
then
5
to complete this part of the procedure.