Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Patton electronic
  4. forefront 2616rc
  5. Manual De Usuario

Patton electronic forefront 2616rc Manual De Usuario

Descargar
Página de 80
Hardware overview
18
Model 2616RC T-DAC User Manual 
1 • Introduction
LED display
Front panel LEDs (
 on page 17) display the status of the WAN ports, the T1/E1 ports, the Ethernet 
LAN port, power, and the alarms. The LEDs are described in 
Table 3. LED definitions 
LED
Color Status
Meaning
POWER
Green On solid Power is being applied. No action recommended.
Flashing The 2616RC has detected a power failure on a power bus.
Off
No input power is being applied.
CPU FAIL
Red
On solid CPU is unable to load the software from FLASH to RAM for operation.
Off
The CPU is operating normally.
ALARM
Yellow On solid A minor alarm condition has been detected.
Flashing A major alarm condition has been detected.
Off
The Model 2616RC is operating normally.
SYSTEM
Green
Flashing The Model 2616RC is operating normally.
Off
The Model 2616RC is not functioning properly.
ETHERNET
Green On solid Link status is nominal for the Ethernet port. No action recommended.
Off
A valid link has not been detected.
CLK SOURCE
Green On solid The 2616RC is set as the Master Clock source.
Flashing The 2616RC is set as the secondary clock source.
Off
The 2616RC is set as the slave, getting its clock from the H.110 Bus.
CLK ERROR
Yellow On solid Master Clock source has been lost and the 2616RC is using the secondary source 
for its clock.
Flashing Master Clock source and the Secondary Clock source have been lost and the 2616RC 
is using its internal crystal for its clock. 
Off
No clock errors currently detected. 
TEST MODE
Green On solid One or more T1/E1 ports or T1/E1 ports is in test mode.
Flashing One or more of the T1/E1 ports or the T1/E1 ports is in test mode and errors have 
been received.
Off
None of the T1/E1 ports is operating in test mode.
T1/E1  
CONNECTION 
(LEDs 1–16)
Green On solid The port is activated, linked, and operating normally.
Flashing The port is activated but not linked or in an error state.
READY
Blue
On
Card ready for removal from Patton ForeFront chassis.
Off
Card not ready for removal from Patton ForeFront chassis.