Patton electronic forefront 2616rc Manual De Usuario
Using a browser to complete Model 2616RC configuration
51
Model 2616RC T-DAC User Manual
3 • Configuring the T-DAC for operation
2. From the Line Coding pull-down menu (
), select dsx1B8ZS(2) or dsx1AMI(5).
Figure 46. Line Coding pull-down menu with dsx1B8ZS(2) selected
3. From the Line Build Out pull-down menu (
) select t1pulse0dB(1).
Figure 47. Line Build Out pull-down menu with t1pulse0dB(1) selected
4. Click on Submit Query to apply your settings.
At this point the T1/E1 front panel LEDs will become active. The T1/E1 indicator LED should now display a
steady green light, indicating the T-DAC has synchronized with the E1 line. If the E1 line is not connected to
the 2616RC, T1/E1 link pages will display the hyperlink ALARMS PRESENT (
steady green light, indicating the T-DAC has synchronized with the E1 line. If the E1 line is not connected to
the 2616RC, T1/E1 link pages will display the hyperlink ALARMS PRESENT (
) for that T1/E1 link.
Figure 48. T1 ALARMS PRESENT indicator on T1/E1 LINK ACTIVITY page
After you connect the E1 line to the WAN port on the rear of the Model 2616RC, these alarms should disappear.