Polycom spectralink 1725-36024-001 Manual De Usuario

English

11

Charger Models

Three charger models are available for the SpectraLink 8020/8030 
Wireless Telephone. The Single Charger will charge a single handset with 
an installed Battery Pack. The Dual Charger will charge the handset and a 
spare Battery Pack. The Quad Charger can charge up to four Battery Packs 
at a time. Any Battery Pack for the SpectraLink 8020/8030 Wireless 
Telephone can be charged in any charger.

The Single and Dual Chargers allow the handset to remain operative in 
speakerphone mode or with a headset while charging. Handsets may be 
charged while in standby mode, while in an active call or while turned off.

Place the Single or Dual Charger on a flat, horizontal surface. Plug the 
power supply into the charger and into an appropriate wall outlet. The 
Quad Charger may be mounted on a horizontal or vertical surface.

Single Charger

Place the handset in the Single Charger facing forward. While the handset 
is charging in standby mode, it will display its extension number and 

. An animated charge icon will indicate that charging is in 

progress. The handset is fully operational and will ring if called. When the 
handset is charging while turned off, only 

 will display and no 

calls will be received. The dots will be racing during the charging cycle. 

When the handset is fully charged, 

 will display.

Dual Charger

Place the handset in the front slot, facing forward. The Battery Pack alone 
snaps into the charging bay.

The LED indicates the status of the Battery Pack in the rear bay. The 
handset displays its charging status as described for the Single Charger.

When the handset is fully charged or is removed, the Battery Pack in the 
rear slot will begin charging.

Note that the time it takes for the Battery Pack to charge will be lengthened 
if its charging cycle is interrupted by the placement of a handset in the front 
slot.