Polycom viewstation fx vs4000 Manual De Usuario
Administrator’s Guide for ViewStation EX, ViewStation FX, and VS4000
3-18
www.polycom.com/videodocumentation
Configuring the Serial V.35/RS-449/RS-530 Network Interface
To use the serial network interface for the system, you may need to configure the
following:
following:
❑
Video network settings
❑
Network control signals
❑
Calling profile
❑
Broadcast Mode
❑
Dialing speeds
❑
Crypto Resync
To configure serial video network settings:
1.
Go to System Info > Admin Setup > Video Network > Video Network.
2.
Configure these settings:
Setting
Description
RS-366 Dialing
Allows users to dial calls from this system.
Uncheck this box if this is a dedicated connection or if
another device is used for dialing calls.
another device is used for dialing calls.
V.35 Ports Used
Specifies whether one or two lines are connected.
Dialing Protocol
Specifies the protocol used by this system.
Broadcast Mode
Enables support for H.331 broadcast transmissions from
this system.
this system.
This enables the system to send video and audio to many
other system, such as large satellite networks.
other system, such as large satellite networks.