Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Philips
  4. s10
  5. Manual De Usuario

Philips s10 Manual De Usuario

Descargar
Página de 58
8  EN
Change the remote access 
PIN code
Note
 
•
The default answering machine remote access PIN 
code is 0000 and it is important to change it to ensure 
the security.
1 
Tap   from the main menu screen.
2 
Select [Remote access] > [Change PIN].
3 
Enter the old remote access PIN/passcode, 
then tap [OK] to confirm.
4 
Enter the new remote access PIN/passcode, 
then tap [OK] to confirm.
5 
Enter the new remote access PIN/passcode 
again, then tap [OK] to confirm.
 
»
The setting is saved.
Charge the handset
Place the handset on the base station to charge 
the handset. When the handset is placed 
correctly on the base station, you hear a docking 
tone (see ‘Set the docking tone’ on page 35).
 
»
The handset starts charging.
Note
 
•
Charge the battery for 6 hours before first use.
 
•
It is normal for the handset to become warm during 
charging.
 
•
Over time, capacity of batteries decreases. This is a 
normal battery behavior.
 
•
You can order replacement batteries through www.
philips.com or the Philips Service organization.
 
•
When the phone is not in use, place the handset to the 
base station or charging cradle.
Your phone is now ready to use.
Check the battery level
 
The battery icon displays the current battery 
level.
When the handset is off the base 
station/charger, the bars indicate the 
battery level (from full to low).
When the handset is on the base 
station/charger, the bars keep scrolling 
until charging is complete.
When the battery is empty, this icon 
flashes. If you are in a call you hear an 
alert tone. 
The battery is low and needs recharging.
If you are on the phone, you hear warning tones 
when the battery is almost empty. The handset 
turns off when the battery is completely empty.
What is standby mode?
Your phone is in standby mode when it is idle. 
In standby mode the screen will display the 
time and date and notifications of missed calls 
or messages. Depending on your settings, a 
mode (see ‘Screen saver’ on page 37). The 
screen will dim or turn off if the handset is not 
on the base station or charging cradle.