Philips s10 Manual De Usuario

6  EN

3  Get started

Caution

 

•

Make sure that you have read the safety instructions in 

the ‘Important safety instructions’ section before you 

connect and install your handset.

Connect the base station

Warning

 

•

Risk of product damage! Make sure that the power 

supply voltage corresponds to the voltage printed on 

the back or underside of the phone.

 

•

Use only the supplied power adapter to charge the 

batteries.

Note

 

•

If you subscribe to the digital subscriber line (DSL) 

high speed internet service through your telephone 

line, ensure you install a DSL filter between the 

telephone line cord and the power socket. The filter 

prevents noise and caller ID problems caused by DSL 

interference. For further information on DSL filters, 

contact your DSL service provider.

 

•

The type plate is located on the bottom of the base 

station.

1 

Connect the power adapter to: 

•  the DC input jack at the bottom of the 

base station;

•  the power socket on the wall.

2 

Connect the line cord to: 

•  the telephone socket at the bottom of 

the base station;

•  the telephone socket on the wall.

 

3 

Connect the power adapter to (for extra 

handset versions only):

•  the DC input jack at the back of the 

extra handset charger.

•  the power socket on the wall.