Maytag mat12pdb Manual De Usuario
18
16022842 Rev. 0
©2003 Maytag Appliances Company
WARNING
!
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
disconnect power to unit before servicing.
Disassembly Procedures
Lid Switch Assembly (Prior series 15)
1. Disconnect power supply to unit.
2. Remove Control Panel.
3. Remove wires attached to switches and fuse.
4. Remove adjusting screw securing lid switch bracket
2. Remove Control Panel.
3. Remove wires attached to switches and fuse.
4. Remove adjusting screw securing lid switch bracket
to the top cover.
Reversing Motor Relay
1. Disconnection power supply to unit.
2. Remove all four T-20H Torx screws securing control
2. Remove all four T-20H Torx screws securing control
panel facia.
3. Disconnect all wires attached to Reversing Motor
Relay.
4. Remove single screw securing relay.
Note:
Note:
Notice the positioning tab for ease in mounting
and locating relay onto the Control Panel.
Indicator Light (Timer models)
1. Disconnect power supply to unit.
2. Remove Control Panel.
3. Compress tab on the end of the Indicator Light and
2. Remove Control Panel.
3. Compress tab on the end of the Indicator Light and
remove from back side of Control Panel.
4. Remove wires from assembly.
4. Lift tab and move switch forward and out.
Lid Switch Assembly (After series 15)
1. Disconnect power supply to unit.
2. Remove Control Panel
3. Remove wire connector attached to the switch.
2. Remove Control Panel
3. Remove wire connector attached to the switch.
Lift Tab