Meridian Audio 800 Manual De Usuario

CONFIGURING

WITHOUT A

COMPUTER

The DVD/CD player provides several sets of standard settings, called Types,

which configure all aspects of the 800 into one of a number of alternative

standard configurations.

Types 0 to 5 are factory settings, designed to cater for the most commonly

needed configurations of associated equipment.

These standard Types are shown in the following table:

0

6

Yes

Yes

Yes

Yes

Yes

Yes

1

6

No

Yes

Yes

Yes

Yes

Yes

2

2

Yes

Yes

Yes

Yes

Yes

Yes

3

6

Yes

Yes

Yes

No

No

No

4

6

No

Yes

Yes

No

No

No

5

2

No

Yes

Yes

No

No

No

Choose one of the Types 0, 1, or 2 if you want to connect the auxiliary

output to an alternative input on the main decoder, or to a second zone

with a suitable Meridian decoder.

Choose one of the Types 3, 4, or 5 if you want to connect the auxiliary

output to a non-Meridian decoder or preamplifier.

Choose one of the Types 0, 1, 3, or 4 if you are connecting the main output

to a multi-channel decoder input. Types 1 or 4 can also be used to connect

the main outputs to DSP loudspeakers.

Choose Type 2 to connect the main output to a 2-channel decoder such as a

non-DVD-Audio 861 or 568.

Choose Type 5 to connect the main output to a single pair of DSP

loudspeakers or a 2-channel preamplifier.

In addition, your installer may have provided one or more named User

Types, with settings appropriate to the configuration of equipment when

your 800 was installed.

You can reset the configuration of the DVD/CD player to any of these Types

to restore it to the state it was in when it was installed. Note: Selecting a

Type will clear any configuration and calibration changes you have made.