Meridian Audio 800 Manual De Usuario

CONFIGURING

WITHOUT A

COMPUTER

• Switch off any power amplifiers that are connected to the 800 and put

any digital speakers into standby.

• Put the DVD/CD player into standby by pressing Off (front panel or

remote).

• Press and hold down Gain+ (under the front panel).

The display shows:

Type in... 3

• Keep holding down Gain+ for a further three seconds.

The display shows:

Type- please wait.

Then after a short delay the display shows the current Type.

For example:

Type   3

• Press 

A or V on the front panel to change the Type number.

The display shows:

Typing, please wait.

• Wait for one second, and then put the DVD/CD player into standby by

pressing Off (front panel or remote).

• Switch on again to use the standard settings you have selected.

If you are using the 800 with other Meridian equipment, such as the 861

Reference Digital Surround Controller, you should set up the comms with

the following automatic setup procedure:

• Switch all the units to standby.

• Press  Clear  (remote).

Each unit will display:

Auto Setup

The 800 will then be designated as

the controller, and display:

Controller