Metra Electronics 99-6507 Manual De Usuario
12
99-6507
kit assEMBlY
Din raDio Provision witH PockEt
B
C
A
1 Slide the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(Figure A)
the metal locking tabs down.
(Figure A)
2 Slide the after-market head unit into
the cage and secure. (Figure B)
3 Using the alignment pins on the
trim plates & the corresponding
holes in the housing, attach the
upper trim plate and the lower trim
plate supplied with the kit.
holes in the housing, attach the
upper trim plate and the lower trim
plate supplied with the kit.
Figure C
NOTE: You will need to remove the
aftermarket radio’s trim ring if
equipped.
aftermarket radio’s trim ring if
equipped.
4 Continue to Final Assembly.