Metra Electronics 99-6507 Manual De Usuario
13
99-6507
kit assEMBlY
iso raDio Provision witH PockEt
1 Mount the ISO Brackets to the
radio using the screws supplied
with the radio. Figure A
with the radio. Figure A
2 Slide the radio into the opening
until it snaps into place. Figure B
3 Using the alignment pins on the
trim plates & the corresponding
holes in the housing, attach the
upper trim plate and the lower trim
plate supplied with the kit.
holes in the housing, attach the
upper trim plate and the lower trim
plate supplied with the kit.
Figure B
A
B
NOTE: You will need to remove the
aftermarket radio’s trim ring if
equipped.
aftermarket radio’s trim ring if
equipped.
4 Continue to Final Assembly.