Cisco Systems CATALYST 2940 Manual De Usuario
B-4
Catalyst 2940 Switch Hardware Installation Guide
OL-6157-01
Appendix B Connectors and Cables
Connector Specifications
100BASE-FX Port
The 100BASE-FX port on the Catalyst 2940 8TF-S uses an MT-RJ connector, shown in
. This
port uses 50/125- or 62.5/125-micron multimode fiber-optic cabling.
You can connect a 100BASE-FX port to an SC port on a target device by using one of the MT-RJ
fiber-optic patch cables listed in
fiber-optic patch cables listed in
. Use the Cisco part numbers in
to order the patch
cables that you need.
Figure B-4
MT-RJ Connector
SFP Module Slot
The Catalyst 2940-8TF-S switch has a slot for SFP modules that provide fiber-optic uplink ports.
shows an SFP module connector for a fiber-optic connection.
Figure B-5
SFP Module Connector
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
beams or view directly with optical instruments. Statement 1051
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 272
beams or view directly with optical instruments. Statement 272
Table B-1
MT-RJ Patch Cables for 100BASE-FX Connections
Type
Cisco Part Number
1-meter, MT-RJ-to-SC multimode cable
CAB-MTRJ-SC-MM-1M
3-meter, MT-RJ-to-SC multimode cable
CAB-MTRJ-SC-MM-3M
5-meter, MT-RJ-to-SC multimode cable
CAB-MTRJ-SC-MM-5M
1-meter, MT-RJ-to-ST multimode cable
CAB-MTRJ-ST-MM-1M
3-meter, MT-RJ-to-ST multimode cable
CAB-MTRJ-ST-MM-3M
5-meter, MT-RJ-to-ST multimode cable
CAB-MTRJ-ST-MM-5M
28845
58476