Garmin gps 76 Manual De Usuario

23

23

The GPS Information Page displays your speed, elevation, the estimated 

accuracy, receiver status, satellite locations, satellite signal strength, the date, time 
and the GPS receiver’s current location.

When the GPS is receiving at least three satellite signals, it will provide you 

with the current GPS Speed and the estimated Accuracy of the GPS Location.  The 
GPS must be receiving at least four satellite signals to report the Elevation.

The current status of the GPS receiver will always be displayed. 

 Forces the receiver to search for each satellite individually.

 The receiver will begin in this mode each time the unit 

is turned on.  The GPS receiver will remain in this mode until it has acquired 
at least 3 satellite signals.

 Indicates that the receiver is only using three satellite 

signals.  When a 2D GPS Location is achieved, the GPS will display your 
current position but is incapable of providing an altitude reading. 
 

 Indicates the receiver is currently using at least four 

satellite signals and is capable of providing your current position and altitude.  
A “D” will be displayed in or above the indicator bar for each differentially 
corrected satellite.

 Indicates the receiver is using DGPS or WAAS 

differential data on three satellites. A “D” will be displayed in or above the 
indicator bar for each differentially corrected satellite.

 Indicates the receiver is using DGPS or WAAS 

differential data on at least four satellites.

 Indicates that the GPS receiver has lost satellite 

reception. 
 

— Indicates the GPS 76 is running in Simulator Mode and the 

GPS receiver is turned off.  It is important to remember when you are using 
the Simulator, the GPS 76 can not be used for actual navigation. 

190-00229-00.indd

07/25/01, 11:22 AM

23