Garmin gps 76 Manual De Usuario

25

25

To activate the Options Menu from the GPS Information Page, press the 

MENU Key.  To select an option, highlight the desired selection then press 
ENTER.

This option is used to Start or Stop the Simulator.

This option determines if the satellites are displayed with  

the rings oriented with North toward the top of the display or your current 
track toward the top of the display.

 This option can be used to enter a different elevation.  If 

the GPS has a 2D GPS Location, entering a known elevation can increase 
the GPS accuracy.

 If you have moved the unit to another state, province, or 

country, and you are having trouble locking onto satellite signals select ‘New 
Location’.  

 When you select ‘New Location’, an options menu will be displayed.  This 
menu contains the options ‘Automatic’ or ‘Use Map’.  If you select ‘Automatic’ 
the unit will switch to AutoLocate and begin searching for satellites. This 
method can take up to fi ve minutes for the unit to begin navigation.

If you select ‘Use Map’, you can use the Pointer on the Map Page to select your 
approximate location and the unit will continue to acquire satellites normally 
using the almanac for satellite reference.  Using this method, the unit does not 
need to reinitialize and should receive satellite signals quickly.

If the unit is in the ‘Simulator’ mode, the ‘Use Map’ feature will allow you to 
move the simulated current location.

190-00229-00.indd

07/25/01, 11:22 AM

25