GarrettCom 6K25 Manual De Usuario

Magnum 6K25 Managed Fiber Switch            Installation and User Guide (04/06) 

 

41 

.

.

supplier. If you need to return the unit, use the original shipping container if 

possible. Refer to Chapter 5 for specific return procedures. 

An important feature of the Magnum 6K25 is the use of  Port 

Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since 

the Magnum 6K25 Switches have dual-speed capability for copper ports, the 6 

or 8-port interfaces are designed to support all standard Ethernet media types at 

10 or 100Mps speed.  Each 6K25 PM provides six or eight ports for connecting 

Ethernet segments with its individual connector type and media. 

For a list of 6K25 Port Module types, refer to Section 1.2    

Each 6K25 PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) other user ports. 

 

The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at 

10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-

mode ST-type connectors and 

dual speed copper ports. The 

ST-connector functions as a 

fiber optic transceiver to 

support 100BASE-FX network 

segments. When installed in a 

Magnum 6K25 Managed 

Switch, the copper port 

supports the standard distance 

100m on each port and the fiber 

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, 

i.e., typically 2km at full-duplex and 412m at half-duplex. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and  

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 

 

4