Crestron pmk-17l Manual De Usuario
Crestron PMK-17L
Pre-Construction
Mount
Kit
Pre-Construction Mount Kit:
PMK-17L
PMK-17L
Description
The PMK-17L is a pre-construction mount kit for the Crestron Isys
®
TPS-17L wall
mounted touchpanel. The PMK-17L can also be used with the Isys i/O™
TPMC-17-CH-L and TPMC-17-QM-L wall mounted touchpanels. The PMK-17L is
used for installation on two studs with a 16¼-inch (minimum) space between the
studs. For custom touchpanel placement in a lectern, use the WMKT-17L. The
PMK-17L includes an 18 AWG bus wire to secure touchpanel cabling prior to
drywall installation and to avoid damaging the cables when the opening is routed.
Refer to the physical views (bottom, side, and front) of the PMK-17L, shown after
this paragraph. The table that follows lists all parts included with the PMK-17L.
TPMC-17-CH-L and TPMC-17-QM-L wall mounted touchpanels. The PMK-17L is
used for installation on two studs with a 16¼-inch (minimum) space between the
studs. For custom touchpanel placement in a lectern, use the WMKT-17L. The
PMK-17L includes an 18 AWG bus wire to secure touchpanel cabling prior to
drywall installation and to avoid damaging the cables when the opening is routed.
Refer to the physical views (bottom, side, and front) of the PMK-17L, shown after
this paragraph. The table that follows lists all parts included with the PMK-17L.
NOTE: This mounting kit is to be used only with the TPS-17L, TPMC-17-CH-L,
and TPMC-17-QM-L series of touchpanels.
and TPMC-17-QM-L series of touchpanels.
PMK-17L Physical Views
16.40 in
(41.64 cm)
13.56 in
(34.44 cm)
0.03 in
(0.08 cm)
0.06 in
(0.15 cm)
16.00 in
(40.64 cm)
(PROVIDED BY OTHER)
FOR DRYWALL NAIL
(PROVIDED BY OTHER)
FOR DRYWALL SCREW
CUTTING TOOLS.
AWAY FROM DRYWALL
IN NOTCH TO HANG CABLES
SECURE 18 AWG BUS WIRE
19.00 in
(48.26 cm)
PRE-CONSTRUCTION PLATE
COVER PLATE
Installation Guide - DOC. 6368
Pre-Construction Mount Kit: PMK-17L
• 1