Konica Minolta 7013 psc Manual De Usuario

TCP/IP Configuration-28

12. Add comments to the printcap file. For example, you can type:

Dick's printer down the hall [Enter]

13. Select exit to save your configuration and press [Enter]. 

You are now prepared to print.

Set up a remote printer on the host that sends jobs to a Print Server Card using lpd. 
Use the following procedures to do this:

1. At the prompt, type: mkdev rlp

Note:

You cannot run mkdev rlp twice. If you have additional printers to be configured, 

use the rlpconf command.

2. You will now be asked a series of questions. Respond as follows. Do you want to 

install or remove a remote printer? Type: I

3. Do you want to change printer description file /etc/printcap? Type: Y

4. Write a printer name. For example, type: lprprinter1

5. Is lprprinter1 a remote printer or a local printer? Type: R

6. Enter remote host name: type host name entered in printcap for Print Server Card. 

For example, type: lprprinter

7. Confirm the information you have entered. Type: Y

8. Confirm the preceding connection as your system default. Type: Y

9. Enter another printer name or quit setup. Type: Q

10. Do you want to start the remote daemon now? Type: Y