Konica Minolta 7013 psc Manual De Usuario

TCP/IP Configuration-30

The TCP/IP directory provided with the Print Server Card includes install scripts for 
various UNIX systems. This section describes how to install TCP/IP printing to the 
Print Server Card on any of the following operating systems:

• DEC ULTRIX 4.3 RISC 

• System V Rel. 4 

• Solaris (Ver. 1.x, 2.x) 

• SCO UNIX

• OSF1/ALPHA 

• IBM AIX  

• HP/UX 

Once the Print Server Card has its IP information loaded, the following steps are nec-
essary for Host-Side TCP/IP printing: 

1. Load the print server software on your workstation. It is presented as a tar file on 

the TCP/IP directory.

2. Run the appropriate installation script, if available.

3. Complete the configuration for your operating system.

The following procedures are only necessary when using the supplied host-based lpr 
capability. Loading the software is not necessary if printer-based lpr is used. 

1. Log in as superuser to the system that spools directly to the print server.

2. Insert the print server's CD-ROM in the host drive.

3. Go to or create the directory in which you want to install the software. For       

example:

mkdir /usr/PSC_install

Note:

If you already have a Print Server Card printer at your site and you are now install-

ing another one, delete the files in the installation directory (not /usr/nic).  If these files 

remain, they can prevent the installation of a subsequent print server.

4. Use the tar command to load the software from the CD-ROM. Choose your UNIX 

version from the example from the following table, or if not shown, consult the 

man page for your system: