Cisco Systems 7902G Manual De Usuario
2-9
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Chapter 2 Preparing to Install the Cisco IP Phone on Your Network
Guidelines for Configuring Ports on the Cisco IP Phone models 7902G/7905G/7912G
Related Topics
•
•
Using the Access Port
Use the access port to connect a network device, such as a computer, to the phone.
You must use a straight-through cable on this port.
You must use a straight-through cable on this port.
Related Topic
•
Providing Power to the Cisco IP Phone
You can power a Cisco IP Phone from an external power supply, from a switch
port, or from a power source between the phone and the switch.
port, or from a power source between the phone and the switch.
The Cisco IP Phone can be powered by the following sources:
•
External power—optional Cisco AC adapter and power cord for connecting
to a standard wall receptacle.
to a standard wall receptacle.
•
Inline power—inline power provider to the Cisco IP Phone when connected
to a Cisco Catalyst switch capable of providing inline power.
to a Cisco Catalyst switch capable of providing inline power.
Note
Only the network port supports inline power from the
Cisco Catalyst switches.
Cisco Catalyst switches.
•
WS-PWR-PANEL—power patch panel that allows the Cisco IP Phone to be
connected to existing Catalyst 4000, 5000, and 6000 family 10/100BaseTX
switching modules.
connected to existing Catalyst 4000, 5000, and 6000 family 10/100BaseTX
switching modules.
This module sends power on pins 4, 5, 7, & 8, which are not used for Ethernet
signaling. The power patch panel also attempts to verify that the attached
device is a Cisco IP Phone before providing power.
signaling. The power patch panel also attempts to verify that the attached
device is a Cisco IP Phone before providing power.