Cisco Systems ATA 188 Manual De Usuario
5-29
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)
OL-4008-01
Chapter 5 Parameters and Defaults
Operating Parameters
TimeZone
Description
This parameter is the timezone offset from Greenwich Mean Time (GMT) for time-stamping incoming
calls with local time (to use for Caller ID display, for example).
calls with local time (to use for Caller ID display, for example).
Local time is generated by the following formula:
•
Local Time=GMT + TimeZone, if TimeZone <= 12
•
Local Time=GMT + TimeZone - 25, if TimeZone > 12
Value Type
Integer
Range
0-24
Default
17
Voice Configuration Menu Access Code
302
13
0—Use G.711µ-law
for fax pass-through codec.
1—Use G.711A-law for fax pass-through codec.
14-15
0—Use fax pass-through.
1—Use codec negotiation in sending fax.
2—Reserved.
3—Reserved.
16—18
Not used for H.323.
19
0—Disable sending ringback tone to the caller.
1—Enable sending ringback tone to the caller.
20-22
Not used by H.323.
23
0—Do not allow the end-user to configure the permanent default call-waiting setting for every call.
Instead, use the service provider's default call-waiting setting for every call.
Instead, use the service provider's default call-waiting setting for every call.
1—Allows the end-user to configure the permanent default call-waiting setting for every call, and
override the service provider's default call-waiting setting.
override the service provider's default call-waiting setting.
24
0/1—Disable/enable the mixing of audio and call waiting tone during a call.
25
Not used for H.323.
26 to 31
Reserved.
Table 5-4
ConnectMode Parameter Bit Definitions (continued)
Bit Number
Definition