Cisco Systems ata 186 Manual De Usuario
5-8
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Network Configuration Parameters
Value Type
Hexadecimal string of the form:
Rc4PasswdInHex/macinHex_12
•
rc4KeyInHex_n is a hexadecimal string of one to 64 characters.
•
/macInHex_12 is the optional extension consisting of a forward slash ( / ) followed by the six-byte
MAC address of the Cisco ATA to which the configuration file will be downloaded.
MAC address of the Cisco ATA to which the configuration file will be downloaded.
Range
Maximum number of characters: 64
Default
0
Voice Configuration Menu Access Code
Not applicable for this parameter.
Related Parameters
•
•
•
Network Configuration Parameters
This section includes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
address information, and parameters that you need to statically configure if you disable DHCP:
•
•
•
•
•
•
•
•
•
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
the subnet mask, DNS, NTP, TFTP, and other parameters.
•
1—Enable DHCP
•
0—Disable DHCP