Casio exilim k1160pcm2dmx Manual De Usuario

165

Appendix

The camera’s protection function may have activated 
because camera temperature is too high. Turn off the 
camera and wait until it cools down before trying to use it 
again.

Battery power is low.

Move Out CS or Move In CS framing could not be 
performed for some reason, and so the camera cannot go 
into auto record standby. Perform the framing operation 
again (page 71). 

The image you specified with the slideshow “Images” 
setting cannot be found. Change the “Images” setting (page 
95) and try again.

You are attempting to save a user BEST SHOT scene in 
the “SCENE” folder when the folder already contains 999 
user scenes.

There is something wrong with the memory card. Turn off 
the camera, remove the memory card and then reload it 
into the camera. If this message re-appears when you turn 
the camera back on, format the memory card (page 135).

• Formatting a memory card deletes all its files. Before 

formatting, try transferring recoverable files to a 
computer or some other storage device.

You are attempting to connect the camera to a printer while 
the camera’s USB settings are not compatible with the USB 
system of the printer (page 106).

Battery power is low, so an image file could not be saved.

The flash is disabled for a short while to protect the flash 
unit after consecutive operations during Flash CS. You will 
be able to resume using the flash after this message 
disappears.

The flash needs to be fired by the flash unit is not open. 
Press 

ð

 (Flash up)

 to open the flash unit.

Battery power is too low to fire the flash. Replace or charge 
the batteries as soon as possible.