CyberData 010859 Manual De Usuario

CyberData Corporation

930111F

VoIP Loudspeaker Amplifier Operations Guide

Installing the VoIP Loudspeaker Amplifier

Loudspeaker Amplifier Setup

2.2.5 Confirm the IP Address, Test the Audio, and Check the Volume

When the loudspeaker amplifier is operational and linked to the network, use the Reset Test
Function Management (RTFM) switch (

Figure 2-10

) on the loudspeaker amplifier face to announce

and confirm the loudspeaker amplifier’s IP Address, test that the audio is working, and check the
volume.

Figure 2-10. RTFM Switch

To announce a loudspeaker amplifier’s current IP address:

1. Press and hold the RTFM switch until it beeps (after one second).

2. Release the switch to hear the IP address announcement, and check the loudspeaker amplifier

volume.

Caution

Equipment Caution: Pressing and holding the RTFM switch for longer than
20 seconds will restore the loudspeaker amplifier to the factory default
settings. See

Section 2.6, "Restore the Factory Default Settings"

RTFM switch