bobcat t190 Manual De Usuario
T190 Compact Track Loader
105
Operation & Maintenance Manual
BOB-TACH (POWER - OPTION)
Inspection and Maintenance
Figure 195
Push and hold the BOB-TACH "WEDGES UP" switch
[Figure 196] until wedges are fully raised. Push and hold
the BOB-TACH "WEDGES DOWN" switch [Figure 196]
until the wedges are fully down.
[Figure 196] until wedges are fully raised. Push and hold
the BOB-TACH "WEDGES DOWN" switch [Figure 196]
until the wedges are fully down.
The wedges must move freely.
WARNING
Bob-Tach wedges must extend through the holes in
attachment. Levers must be fully down and locked.
Failure to secure wedges can allow attachment to
come off and cause injury or death.
attachment. Levers must be fully down and locked.
Failure to secure wedges can allow attachment to
come off and cause injury or death.
W-2102-0588
Figure 196
The wedges (1) must extend through the holes in the
attachment mounting frame (2) [Figure 196].
attachment mounting frame (2) [Figure 196].
The spring loaded wedge (1) [Figure 196] must contact
the lower edge of the hole in the attachment
[Figure 196].
the lower edge of the hole in the attachment
[Figure 196].
If the wedge does not contact the lower edge of the hole
[Figure 196], the attachment will be loose and can come
off the Bob-Tach.
[Figure 196], the attachment will be loose and can come
off the Bob-Tach.
Figure 197
Inspect the mounting frame on the attachment and the
Bob-Tach, linkages and wedges for excessive wear or
damage [Figure 197]. Replace any parts that are
damaged, bent, or missing. Keep all fasteners tight.
Bob-Tach, linkages and wedges for excessive wear or
damage [Figure 197]. Replace any parts that are
damaged, bent, or missing. Keep all fasteners tight.
Look for cracked welds. Contact your Bobcat dealer for
repair or replacement parts.
repair or replacement parts.
Lubricate the wedges. (See LUBRICATING THE
LOADER on Page 101.)
LOADER on Page 101.)
B-22965
B-15891
P-24487
B-15177
2
1
Wedge must contact
lower edge of hole in the
attachment.
lower edge of hole in the
attachment.
B-17460