bobcat t190 Manual De Usuario

W-2052-0500

The dealer can identify, for each model loader, the
attachments and buckets approved by Bobcat. The
buckets and attachments are approved for Rated
Operating Capacity  and for secure fastening to the
Bob-Tach.

The Rated Operating Capacity for this loader is shown on
a decal in the operator cab. (See Machine Rating on
Page 122.)

The Rated Operating Capacity is determined by using a
standard dirt bucket, and material of normal density, such
as dirt or dry gravel. If longer buckets are used, the load
center moves forward and reduces the Rated Operating
Capacity. If very dense material is loaded, the volume
must be reduced to prevent overloading.

Exceeding the Rated Operating Capacity [Figure 77] can
cause the following problems:

•

Steering the loader may be difficult.

•

Tracks will wear faster.

•

There will be a loss of stability.

•

The life of the Bobcat Loader will be reduced.

Use the correct size bucket for the type and density of
material being handled. For safe handling of materials
and avoiding machine damage, the attachment (or
bucket) should handle a full load without going over the
Rated Operating Capacity for the loader. Partial loads
make steering more difficult.

The maximum load to be carried when using a pallet fork
is shown on a decal located on the pallet fork frame (1)
[Figure 78].

See your Bobcat dealer for more information about pallet
fork inspection, maintenance and replacement. See your
Bobcat Loader dealer for Rated Operating Capacity when
using a pallet fork and for other available attachments.

B-20639

B-17255