bobcat t190 Manual De Usuario
T190 Compact Track Loader
Operation & Maintenance Manual
Operation & Maintenance Manual
50
Digging And Filling A Hole (Foot Pedals)
Digging
Figure 103
Lower the lift arms all the way (1) [Figure 103]. Put the
cutting edge of the bucket on the ground (2)
[Figure 103].
cutting edge of the bucket on the ground (2)
[Figure 103].
Drive forward slowly and continue to tilt the bucket
down (2) [Figure 103] until it enters the ground.
down (2) [Figure 103] until it enters the ground.
Raise the cutting edge a small amount (3) [Figure 103]
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge of the
bucket (2 and 3) [Figure 103] while driving forward
slowly.
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge of the
bucket (2 and 3) [Figure 103] while driving forward
slowly.
Figure 104
Tilt the bucket backward (1) [Figure 104] as far as it will
go when the bucket is full.
go when the bucket is full.
Filling
Figure 105
Lower the lift arms (1) [Figure 105] and put the cutting
edge of the bucket on the ground (2) [Figure 105]. Drive
forward to the edge of the hole to push the material into
the hole.
edge of the bucket on the ground (2) [Figure 105]. Drive
forward to the edge of the hole to push the material into
the hole.
Tilt the bucket forward (2) [Figure 105] as soon as it is
past the edge of the hole.
past the edge of the hole.
If necessary, raise the lift arms to empty the bucket.
B-15961
B-15973
1
3
2
B-15960
B-15973
1
B-15964
B-15973
2
1