bobcat t190 Manual De Usuario
T190 Compact Track Loader
Operation & Maintenance Manual
Operation & Maintenance Manual
56
Digging And Filling A Hole (SJC - ‘ISO’ Pattern)
Digging
Figure 117
Lower the lift arms all the way (1) [Figure 117]. Put the
cutting edge of the bucket on the ground (2)
[Figure 117].
cutting edge of the bucket on the ground (2)
[Figure 117].
Drive forward slowly and continue to tilt the bucket
down (2) [Figure 117] until it enters the ground.
down (2) [Figure 117] until it enters the ground.
Raise the cutting edge a small amount (3) [Figure 117]
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge (2 and 3)
[Figure 117] while driving forward.
to increase traction and keep an even digging depth.
Continue to drive forward until the bucket is full. When the
ground is hard, raise and lower the cutting edge (2 and 3)
[Figure 117] while driving forward.
Figure 118
Tilt the bucket backward (1) [Figure 118] as far as it will
go when the bucket is full.
go when the bucket is full.
Filling
Figure 119
Lower the lift arms (1) [Figure 119] and put the cutting
edge of the bucket on the ground (2) [Figure 119]. Drive
forward to the edge of the hole to push the material into
the hole.
edge of the bucket on the ground (2) [Figure 119]. Drive
forward to the edge of the hole to push the material into
the hole.
Tilt the bucket forward (2) [Figure 119] as soon as it is
past the edge of the hole.
past the edge of the hole.
If necessary, raise the lift arms to empty the bucket.
B-15944
P-24820
P-24802
P-24802
3
2
1
B-15960
P-24820
P-24802
P-24802
1
B-15964
2
P-24820
P-24802
P-24802
1