bobcat t190 Manual De Usuario
T190 Compact Track Loader
75
Operation & Maintenance Manual
WARNING
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat. Changes to the cab
can cause loss of operator protection from rollover
and falling objects, and result in injury or death.
drilling holes or adding attachments unless
instructed to do so by Bobcat. Changes to the cab
can cause loss of operator protection from rollover
and falling objects, and result in injury or death.
W-2069-1299
Lowering
Always stop the engine before raising or lowering the cab.
NOTE: Always use the grab handles to lower the cab.
Figure 133
Pull down on the bottom of the operator cab until it stops
at the latching mechanism [Figure 133].
at the latching mechanism [Figure 133].
NOTE: The weight of the cab increases when
equipped with options and accessories such
cab door, heater, air conditioning, etc. In
these cases, the cab may need to be raised
slightly from the latch to be able to release the
latch.
cab door, heater, air conditioning, etc. In
these cases, the cab may need to be raised
slightly from the latch to be able to release the
latch.
Support the cab and release the latching mechanism
(Inset) [Figure 133]. Remove your hand from latching
mechanism when the cab is past the latch stop. Use both
hands to lower the cab all the way.
(Inset) [Figure 133]. Remove your hand from latching
mechanism when the cab is past the latch stop. Use both
hands to lower the cab all the way.
WARNING
PINCH POINT CAN CAUSE INJURY
Remove your hand from the latching mechanism
when the cab is past the latch stop.
when the cab is past the latch stop.
W-2469-0803
Figure 134
Install the plates and nuts [Figure 134] (both sides).
Tighten the nuts to 54-68 Nm torque.
P-24482A
N-20120
P-31289
P-31288