caddx nx-4 Manual

11

Assign authority levels to users by following the steps below.  Assign user codes
before assigning authority levels.

Step 1

Press [

U

]-[6].

Step 2

Enter a  “Master Arm/Disarm Code”.

Step 3

The 

ready light

 will flash.

Step 4

Enter the 2 digit “user number” to be assigned authority (always 2
digits such as 03 for user 3).  The 

ready light

 is constant and the

instant light

 will flash.

Step 5

Lights illuminated indicate the authority levels assigned to this code.
An explanation of the lights is listed below. You may toggle (turn
on/off) the authority level by pressing the number for that authority
level.

Reserved     (Note: Do not change if on.)

Arm Only

Arm Only After Closing Time

Master Arm/Disarm (can program other codes)

Arm/Disarm

Bypass Zones

Open / Close Reporting

Step 6

Press [

U

] [

U

].

This returns you to Step 3 above.  At this point you may enter
another user number to assign authority level.  Repeat Steps 4 - 6
until you have assigned authority levels to all user numbers.

Step 7

Press the [#] key to exit the Assigning Authority Level Program.