jetway 917gbar3a Manual De Usuario

Descargar
Página de 54
 
 
 
                                                                                                                                                                                                                                                                                                                                                
 
 
 
 
39 
Wake-Up by PCI card /Power On by Ring 
During Disabled, the system will ignore any incoming call from the PCI card/modem. During 
Enabled, the system will boot up if there’s an incoming call from the PCI card /modem. 
 
Wake-Up on RTC Alarm 
This function is for setting date and time for your computer to boot up.  During Disabled, you 
cannot use this function.  During Enabled, choose the Date and Time Alarm: 
Date(of month) Alarm 
You can choose which month the system will boot up.  Set to 0, to boot every day. 
Time(hh:mm:ss) Alarm  
You can choose what hour, minute and second the system will boot up. 
 
Note:
 
If you have change the setting, you must let the system boot up until it goes 
to the operating system, before this function will work 
 
PM Timer Reload Events 
Please refer to section 3-8-1 
PCI Express PM Function 
Please refer to section 3-8-2 
 
3-8-1  PM Timer Reload Events 
Phoenix – AwardBIOS CMOS Setup Utility  
PM Timer Reload Events 
 
Item Help 
    Primary IDE 0                   Disabled 
   
Primary IDE 1                   Disabled 
   
Secondary IDE 0                 Disabled 
   
Secondary IDE 1                 Disabled
 
   
FDD, COM, LPT Port              Disabled 
    PCI PIRQ [A-D] #                Disabled 
 
 
  Menu Level >> 
 
↑↓→←
 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 
F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults 
 
3-8-2  PCI Express PM Function 
Phoenix – AwardBIOS CMOS Setup Utility  
PCI Express PM Function 
 
Item Help 
    PCI Express PME                 Enabled 
 
 
 
 
 
 
  Menu Level >> 
 
↑↓→←
 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 
F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults