georg-fischer ea41 Manual De Usuario
¬ ‡
5 3
6. Assembly and Connection
of Modular Components
The electrical actuator EA 41 is equipped with
fastening points which allow for additional
modular components to be mounted.
fastening points which allow for additional
modular components to be mounted.
The configuration of these points is described
under Section 2. The modular components are
connected electrically over the free terminal
points (7–14). The external wiring is done via a
multiple wire cable through a threaded cable
joint. The respective kits are prepared for installa-
tion; the electric cables are ready to use.
under Section 2. The modular components are
connected electrically over the free terminal
points (7–14). The external wiring is done via a
multiple wire cable through a threaded cable
joint. The respective kits are prepared for installa-
tion; the electric cables are ready to use.
In the following sections, the corresponding
assembly points and the wiring are illustrated.
assembly points and the wiring are illustrated.
1990_4_Teil3.p65
7.11.2000, 14:29 Uhr
53