Panasonic DMR-E75V Manual De Instrucciónes

Descargar
Página de 72
Helpful Hints
66
Operation
Page
On the TV
Page
On the unit’s display
Page
Error messages
∫  Common
X HOLD
≥The Child Lock function is activated.
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” 
disappears.
∫  DVD
Cannot finish recording completely.
≥The programme was copy-guarded.
≥The disc may be full.
Cannot record on the disc.
Please check the disc.
Unable to format.
≥The disc may be dirty or scratched.
Cannot record. Disc is full.
≥Create space by erasing any unnecessary titles. [RAM]
≥Use a new disc. [RAM] [DVD-R]
Cannot record. Maximum number of titles 
recorded.
Error has occurred. Please press ENTER. 
Timer Recording standby or Ext Link 
standby will be canceled.
≥Press [ENTER] to start recovery process. You cannot operate the unit while it is 
recovering (“SLF CHECK” appears on the unit’s display).
No Disc
≥The disc is upside down.
Please change the disc.
≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit 
to remove it and check it for scratches or dirt. (The unit turns off automatically 
after you open the tray.)
This is a non-recordable disc. Cannot record.
≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized 
DVD-R.
≥You inserted an unformatted DVD-RAM. Format the disc with this unit.
This disc is not properly formatted. 
Formatting is necessary using DISC 
MANAGEMENT.
≥The operation is prohibited by the unit or disc.
HARD ERR
≥If there is no change after turning the unit on and off, consult the dealer where the 
unit was purchased.
NO READ
≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥You have used a DVD-RAM/PD lens cleaner and it has finished. 
Press [
< OPEN/CLOSE] on the main unit to eject the disc.
PROG FULL
≥There are already 16 timer programmes. Erase unnecessary timer programmes.
2755
REMOTE MODE 
(“
∑” stands for a number.)
≥The remote control and main unit are using different codes. Change the code on 
the remote control.
Press and hold [ENTER] and the 
indicated number button at the same 
time for more than 2 seconds.
SLF CHECK
≥The unit is starting up. Wait until the message disappears.
U59
≥The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until 
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the 
cooling fan on the rear of the unit.
U99
≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to 
standby. Now press [
Í/I] again to turn the unit on.
UNSUPPORT
≥You have inserted a disc the unit cannot play or record on.
VHS
DVD
75VGN.book  66 ページ  2004年7月21日 水曜日 午前11時54分