Panasonic KXFC275E Guía De Operación
7.1 Base unit programming
MMENUN
MSETN
1. MMENUN
2. Press MBN and the 2-digit code (page 42 to
2. Press MBN and the 2-digit code (page 42 to
3. Press the desired command to display the desired
setting.
R This step may be slightly different depending on
R This step may be slightly different depending on
the feature.
4. MSETN
5. To exit programming, press MMENUN.
5. To exit programming, press MMENUN.
7.1.1 Basic features
Feature
Selection
Setting the date and time
MBNM0NM1N
Setting your logo
MBNM0NM2N
MBNM0NM2N
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
MBNM0NM3N
MBNM0NM3N
Printing a sending report
MBNM0NM4N
MBNM0NM4N
M0N “OFF”: Sending reports will not be printed.
M1N “ON”: A sending report will be printed after every fax transmission.
M2N “ERROR” (default): A sending report will be printed only when a fax
transmission fails.
M1N “ON”: A sending report will be printed after every fax transmission.
M2N “ERROR” (default): A sending report will be printed only when a fax
transmission fails.
Changing the ring count in
FAX ONLY mode
MBNM0NM6N
FAX ONLY mode
MBNM0NM6N
M1N “1”, M2N “2” (default), M3N “3”, M4N “4”, M5N “5”, M6N “6”, M7N “7”, M8N
“8”, M9N “9”
“8”, M9N “9”
Note:
R Set feature #77 to “FAX ONLY” (page 46) beforehand.
R Set feature #77 to “FAX ONLY” (page 46) beforehand.
Changing the ring count in
TAM/FAX mode
TAM/FAX mode
MBNM0NM6N
M0N “AUTO”, M2N “2” (default), M3N “3”, M4N “4”, M5N “5”, M6N “6”, M7N “7”
See page 35 for details.
See page 35 for details.
Note:
R Set feature #77 to “TAM/FAX” (page 46) beforehand.
R You can also program this feature with the cordless handset (page 40).
R Set feature #77 to “TAM/FAX” (page 46) beforehand.
R You can also program this feature with the cordless handset (page 40).
MBNM1NM0N
M1N “1 MINUTE”
M2N “GREETING ONLY”: The unit plays the greeting message but does not
record any incoming messages.
M3N “3 MINUTES” (default)
M2N “GREETING ONLY”: The unit plays the greeting message but does not
record any incoming messages.
M3N “3 MINUTES” (default)
Setting the remote operation
ID
ID
MBNM1NM1N
1. MMENUN A MBNM1NM1N
2. To activate the remote operation feature, enter a 3-digit remote operation
2. To activate the remote operation feature, enter a 3-digit remote operation
ID.
R To deactivate the remote operation feature, press MGN.
R To deactivate the remote operation feature, press MGN.
3. MSETN A MMENUN
42
7. . Programmable Features
7. Programmable Features