Panasonic KX-TG7745 Guía De Operación

– 3 –

You can use the unit to make or answer calls using a cellular line. Your cellular phones must have 
Bluetooth

®

 wireless technology that is compatible with this product. For more details, please visit 

our Web site: http://www.panasonic.com/link2cell
L

Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit 
during a cellular call, you may hear noise. For best performance, we recommend placing the 
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.

Handset:
For CELL 1: {MENU} (6241
For CELL 2: {MENU} (6242
L

After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of the 
procedure must be completed within 5 minutes.

Your cellular phone:
While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellular 
phone to enter the registration mode.
L

Depending on your cellular phone, it may ask you to enter the base unit PIN (default: 
“

”).

Handset:
Wait until a long beep sounds.
L

It may take more than 10 seconds to complete registration.

L

When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to the 
base unit. You are ready to make cellular calls.

To select which unit receives calls for the cellular line (default: “

”):

{

OK} s {r}: Select the desired handset or “

”. s {SAVE}

L

If not required, go to step 5.

{

OFF}

Note:
L

Make sure that your cellular phone is set to connect to this product automatically. Refer to your 
cellular phone’s operating instructions.

Trademarks
L

The Bluetooth

®

 word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such 

marks by Panasonic Corporation is under license. All other trademarks identified herein are 
the property of their respective owners.

Cell line

Cell phone
service providers

TG77xx_(en)_QG.fm  Page 3  Tuesday, November 22, 2011  9:34 AM