Panasonic ICX Manual

Section 521

Built-In ACD Supervisor Guide

12

ICX (International) issued March 1999

ICX-35-521 (ACD 3.0)

4.  Set parameter 3, and press the HOLD key.

Example: Enter three digits to set the No Ans Timer.

The program line that was set is updated when the final parameter 
is set. The next line is moved to, and the screen in step 1 is 
redisplayed.

5.  Repeat steps 1 to 4 to set other program lines, and end 

programming at the END/DISC line.

• The program line is updated when the final parameter setup is completed at 

each command, and the next line is moved to. (Example: In the case of the 
FWD command, the program line is updated when the no answer timer of 
parameter 2 is input, and the next line is moved to.)

• If you press soft key 10 and select List at any of the above steps, the List 

Mode screen is redisplayed.

• The END/DISC line cannot be changed nor deleted.

This command inserts a new line in the current setting of displayed program 
lines. Insertion can be repeated up to 19 lines.

The following screen display shows an example of insertion and setting of the 
SEARCH command.

1.  Press the soft keys (1 to 6) for the commands to be set, and press 

the HOLD key.
Example: Press soft key 6 to select SEARCH.

2.  Set parameter 1, and press the HOLD key.

Example: Press key 1 to set group 1.