Panasonic ICX Manual

Descargar
Página de 311
Section 700 - Operation
Chapter 5. Key Telephone Features
ICX-35-700
ICX (International), issued March/1999
 157
EM/24 Console
CPC-96, CPC-288, and CPC-576 All Versions
Description
The EM/24 is a 24-key console that can be attached to a key telephone. The 24 keys on the EM/24 can 
be programmed as Direct Station Select (DSS) keys for internal lines.
In addition to providing direct station selection, the DSS keys also provide Busy Lamp Fields (BLFs) 
that allow you to monitor the status of other extensions. The LED lights red when the assigned 
extension is busy and lights green when Call Forwarding or Do-Not-Disturb (DND) are activated.
For additional information, see “Flexible Function Keys” on page 158.
Hardware Requirements
EM/24 console (VB-D631UK [UK] or VB-44320 [HK, Taiwan, Malaysia, Indonesia])
Considerations
N/A
Flash
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can send a flash signal on your telephone to release an outside line and then either automatically 
reseize the same outside line or switch to extension dial tone status by pressing the FL/R or PROG 
key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension 
dial tone status.
Note:
The following is available for future use only: Alternatively, an extension setting 
determines if pressing a trunk key will place the call on exclusive hold or send a flash to the trunk.
Hardware Requirements
N/A
Considerations
You can send a longer or shorter flash signal, depending on whether you use the FL/R or PROG 
key (flash tone lengths are set for the FL/R and PROG
 
keys through system programming).